Categories
Free Ground Shipping on Internet Orders Over $99.00
    Orders Are Shipped Direct From the Factory in Ohio

      Noshok 2070 Series 2-Valve Block and Bleed, Hard Seat Needle Valves

      • Brand:NOSHOK
      • Product Code: 2070 SERIES
      • 2020 prices
      • Availability: 524
      • Qty:

      Available Options

      *Valve Types (pick one):
      $99.99

      Noshok 2070  2-Valve Block and Bleed, Hard Seat Needle Valves

      2070 Series 2-Valve Block & Bleed, Hard Seat Needle Valves

       

       

      • Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
      • Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation
      • The 1/4" NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
      • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
      • 10,000 psi hard seat pressure rating @ 200 °F
      • Blow-out proof stem provides a secondary stem seal in the full open position
      • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
      • All stems are 316 stainless steel
      • All stem threads are rolled for strength and ease of operation
      • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
      • Slotted spring pin to prevent accidental loosening
      • Vinyl dust cap for bonnet and stem (non-packing)
      Dimensions Options Print Catalog Page
       

       

      ORDERING INFORMATION

      SERIES22-valve    
      SEAT0Hard seat    
      PROCESS CONNECTION7Block & bleed    
      CONNECTION SIZES01/2" NPT21/4" NPT06043/4" NPT male - 1/2" NPT male or female
      VALVE TYPESMFCMale-Female, SteelFMCFemale-Male, SteelFFCRFemale-Female, Steel, Right Vent
      MFCRMale-Female, Steel, Right VentEFMCExtended Female-Male, SteelEFFCExtended Female-Female, Steel
      EMFCExtended Male-Female, SteelFMSFemale-Male, Stainless SteelFFSFemale-Female, Stainless Steel
      MFSMale-Female, Stainless SteelEFMSExtended Female-Male, Stainless SteelFFSRFemale-Female, Stainless Steel, Right Vent
      MFSRMale-Female, Stainless Steel, Right VentFFCFemale-Female, SteelEFFSExtended Female-Female, Stainless Steel
      EMFSExtended Male-Female, Stainless Steel    

          Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

      To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
      NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2070-FFC-HL5)
      NOTE 2: When a packing option is selected, an o-ring option is NOT available.

      ORDERING INFORMATION - Additional Options

      PACKINGSP1PTFEP2Grafoil®**  
      STEM TIPST1Non-rotating (316 stainless)T6Ball (carbide)T8Ball (Monel)
       T5Ball (440C stainless)T7Ball (ceramic)T9Regulating hard
      O-RINGS*EM1EPDMKZ1FFKM (Kalrez® 3018 or equivalent)NB1NBR
      HANDLESHL11-13/16" Mini "T"HL31" Round knurledHL51-3/4" Phenolic
       HL22-1/2" "T"HL41-3/8" Phenolic  

          Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

      † If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the "Pressure vs Temperature: Packing Style with Compatible Fluid" chart.

      *   Other o-ring materials available on request.

      Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block "T" handles (HL2) and bleed mini "T" handles (HL1).

      The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 2070-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

       
       
      NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map

      Write a review

      Your Name:

      Your Review:

      Note: HTML is not translated!

      Rating:BadGood

      Enter the code in the box below:

      Order 24 hours a day and on Saturday or Sunday and have it Shipped out Monday
        Live Chat

        About Noshok

        For nearly half a century NOSHOK has been a pioneer in our industry by continually providing innovative solutions, unparalleled customer support, outstanding value and a broad offering of premium quality product lines.

        1010 West Bagley Road
        Berea, OH 44017

          1-888-509-0111

        Contact

        • 1-888-509-0111
        • 978-362-2688
        • Info@noshok.massmeasure.com

        Copyright 2019 Mass Measure-Noshok All Rights Reserved