Noshok 3010-MMC-P1 3 Valve Manifold, Hard Seat, Flange x Flange, Steel, PTFE Packing
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
|SEAT||0||Hard seat||1||Soft seat|
|PROCESS TYPE||1||Differential pressure|
|CONNECTION||0||1/2" NPT standard or flange|
|VALVE TYPE||MFC||Flange-Female, Steel||MFS||Flange-Female, Stainless Steel||MMC||Flange-Flange, Steel|
|FFC||Female-Female, Steel||FFS||Female-Female, Stainless Steel||MMS||Flange-Flange, Stainless Steel|
|STEM TIPS||T1||Non-rotating (316 stainless)||T6||Ball (carbide)**||T8||Ball (Monel)**|
|T5||Ball (440C stainless)**||T7||Ball (ceramic)**||T9||Non-rotating regulating (316 Stainless)**|
|O-RINGS*||EM1||EPDM||KZ1||FFKM (Kalrez® 3018 or equivalent)||NB1||NBR|
|HANDLES||HL1||1-13/16" Mini "T"||HL4||1-3/8" Phenolic|
|HL3||1" Round knurled||HL5||1-3/4" Phenolic|
† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the "Pressure vs Temperature: Packing Style with Compatible Fluid" chart.
* Other o-ring materials available on request.
** For 3010 only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are "T" handles (HL2).
The handle material will always match the material of the valve, unless otherwise specified. For example, the "T" handle (HL2) on the 3110-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
For NOSHOK Valves with Steel valve types:
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Note: HTML is not translated!
Copyright 2019 Mass Measure-Noshok All Rights Reserved